|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly. You can also use our proprietary expandable rail system (available soon) if you do not have a Kessler Crane. The Shuttle Pod™ has multiple optional camera mounting options available, using the Cheese Plate and 100mm Bowl Mount inserts.
The Shuttle Pod™ is completely smooth and silent and can even be removed and used as a table top dolly, by rolling on a smooth surface.
|
The Shuttle Pod Start Rail Kit (4 ft) is the base to your Shuttle Pod Rail System. By adding on the 4 foot Extension Rail Kit (or multiple), you can expand your Shuttle Pod Rail System to 8 ft, 12 ft, or more (with proper supports).
Starter Kit Includes:
4 ft of Shuttle Pod Rail (2 pcs)
Choose between:
1 Set of Shuttle Pod Outrigger Foot Kit (2 pcs)
or
1 Set of Shuttle Pod End Clamps (2 pcs)
|
The Keeper / Grabber Wheel Kit is used to hold your Shuttle Pod to the rails, when using in an inclined or inverted configuration.
Includes:
2 wheel skirts with 8 wheels and clamp brackets
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turn your 4 foot Shuttle Pod Rail Starter Kit into a 8 foot length, or add multiple extensions to extend the rail length longer. The cross includes standard threaded holes for adding additional support.
Includes:
2 - 4 foot Rails
2 - Coupler Bars
4 - Knobs
1 - Cross Brace
|
The Shuttle Pod Outrigger Foot Kit is an adjustable foot support system that can be attached to the Shuttle Pod rail for our Kessler Crane when using as the rail system for your Shuttle Pod.
Includes set of 2
|
Use these as end clamps for the Shuttle Pod Rails in place of the Shuttle Pod Outrigger Foot Kit.
These clamps are a cheese plate style for mounting monitors and other accessories. (top-side)
Mount these to tripods, light stands, ball mounts, etc. using the provided 3/8"-16 Helicoil or 3/8"-16 and 1/4"-20 threaded holes. (bottom-side)
Includes 2 clamps
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional Shuttle Pod Pedestal Feet are used to sit the Shuttle Pod on the ground when converting the Shuttle Pod to the winch system, or using as a low mount shooting platform.
|
The 100mm Bowl Mount allows for mounting a 100mm Ball fluid head to the Shuttle Pod. You may also mount a 75mm Ball fluid head, using the optional 100mm - 75mm Bowl Adapter ring.
Not compatible with first edition Shuttle Pod that has the camera platform without the center insert "cutout". If you have the original Shuttle Pod that only has the mounting holes in the center of the plate, this will not work, and you will need the 100mm High Hat in the slider accessories area.
Includes:
100mm Bowl Mount w/ Mounting Hardware
Cup Washer
3/8"-16 Threaded Knob
|
Use the Shuttle Pod Cross Brace when you need to add additional supports under your Shuttle Pod rail (or Kessler Crane being used as your rail). The cross brace includes standard threaded holes for adding additional support.
Includes:
4 - knobs
1 - cross brace
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cheese Plate mounting insert for the Shuttle Pod and Shuttle Pod Mini.
|
Choose your desired belt length for extending your Shuttle Pod.
|
|
|
