Facebook Twitter YouTube Vimeo

  Home > Products > Accessories > Camera Slider Accessories >

  Kessler Low Profile Ball Head (3/8"-16)



List Price: $189.95
Our Price: $149.95
You save $40.00!

Additional Top Plate*:
1/4"-20 [Add $29.95]

Mount Add-Ons:
Multi-Angle Mounting Plate [Add $99.95]

Description Videos
Instruction Manual

This has a 3/8"-16 mount on top and bottom

The Kessler Low Profile Ball Head is an easy to use, ultra-low profile ball head system with a heavy duty weight capacity. The strong locking ball has 62 degrees of total adjustability. It features a 3/8”-16 thread stud on the top and bottom providing easy mounting to all the Kessler sliders and Shuttle Pods, without the need for an adapter. The modular design allows the Low Profile head to be used on other Kessler mounting accessories such as the Cheese Plate, Multi-Angle Mounting Plate (for mounting a camera in multiple angle configurations including 90° for vertical slider moves), or the Kessler Kwik Release System. Other mounting accessories that accept a standard 3/8”-16 threaded stud are also compatible.

Technical Specs
  • Weight Capacity: 40lbs at center.

Accessories for this product...
Manfrotto 577 Quick Release Adapter Kessler Multi-Angle Cheese Plate Kessler Kwik Release Kessler Multi-Angle Mounting Plate
Our Price: $69.95

Our Price: $49.95

Our Price: $139.95

Our Price: $99.95


Average Customer Review: 1.5 of 5 | Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
Unfortunately, didn't work out for me. October 28, 2014
Reviewer: Raul  
I had to return this item as the whole thing would keep unscrewing from my slider's carriage, every time I would try to loosen the ball head for camera adjustments.  I ended up buying a flat mount fluid head afterwards.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Low profile Ball head - stuck July 9, 2014
Reviewer: Sandesh Kadur from Brownsville, TX United States  
I've had the Kessler for over a year now and since day one the Low-profile ball head has been stuck after having just once hand-tigtened it when I first got the slider. I wrote in, but no response... so now I've had a low-proifle ball head that has seen no use and any amount of prying has not helped. Please do email me a solution to 'unlock' the ball head please... Thanks!

Was this review helpful to you?

  2 of 2 people found the following review helpful:
Finicky Tightening February 1, 2014
Reviewer: Jon R. from Wisconsin  
Overall solid construction, but seems to be better suited for small DSLR rigs (without much else rigged). The tightening of the ball seems a bit off. You crank everything down setup at the angle you want, but then the unit needs an additional twist to fully lock to the base. This throws my compositions off by about a 1/2 inch. You can normally get close by compensating for the final tightening, but for the price, I would hope for more precision. Also, you need to be very careful about over-tightening (which doesn't take much). I had to return a unit that could no longer tighten the ball.

Was this review helpful to you?

Browse for more products in the same category as this item:

Products > Accessories > Camera Slider Accessories
Products > Camera Sliders > Accessories
Products > Tripods & Heads > Heads
Products > Mounting & Grip
Products > Camera Sliders
Products > Tripods & Heads
Products > Accessories