Facebook Twitter YouTube Vimeo
0

  Home > Products > Motion Control > elektraDRIVE > Controllers >

  Kessler Camera Control Module v2.0



 

CLICK THE IMAGE ABOVE TO VIEW THE PHOTO GALLERY



Our Price: $99.95


Camera Control Cable*:
  

 
Description Videos
 
The Camera Control Module is an inline interface box between the Oracle Controller and either a slider motor or Pan & Tilt Head. With the Camera Control Module, you are able to access and use the camera control features of the Oracle Controller to be able to trigger a camera. Use this as a remote trigger for your camera or an intervalometer for time-lapses, including Stop-Motion and Shoot-Move-Shoot modes.

Note: As of March 1, 2012 the new version (v2.0) of the Camera Control Module has been released. This update now allows for the control of your camera's exposure with the ORACLE, when your camera is set to Bulb Mode. All new orders will be shipped with v2.0

To verify if you have a CCM with the v2.0 firmware, unscrew the lid and check the white tape on the inside wall. V2 will be marked on the white label.


The Camera Control Module is required for the intervalometer function as well as some other features of the ORACLE Controller.

These features include:
Manual Camera Remote Trigger
Intervalometer Trigger
Shoot-Move-Shoot Time Lapse
Stop Motion Mode
Bulb Mode (new with v2.0)

You will need an ORACLE Controller with firmware version v2.06.1SL or newer and a camera control cable for your camera. The Camera Control Module comes with your choice of one camera control cable. Additional cables for other cameras can be purchased separately.

Chart showing which cables are required for the various cameras can be found below under the Technical Specs.

To upgrade your Camera Control Module to v2.0, you will need to place an order on the website for the upgrade and send in your Camera Control Module. The upgrade is free, however shipping costs still apply.


Note that all new orders for Camera Control Modules ship with v2.0




Technical Specs

Accessories for this product...
6' CAT5 Extension Cable & Coupler Kit CB1 Cable RS1 Cable N3+ Cable
Our Price: $19.95

Add
Our Price: $19.95

Add
Our Price: $19.95

Add
Our Price: $19.95

Add
Crossover Cable & Coupler for Revolution Head (Pan Axis) S1 Cable DC1 Cable DC0 Cable
Our Price: $14.95

Add
Our Price: $19.95

Add
Our Price: $19.95

Add
Our Price: $19.95

Add
E3 Cable UC1 Cable DC2 Cable
Our Price: $19.95

Add
Our Price: $19.95

Add
Our Price: $19.95

Add


Average Customer Review: 4 of 5 | Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
It takes batteries and a screw driver January 10, 2014
Reviewer: Lauren Cohn from Winter Garden, FL United States  
It would be 5 stars if you didn't need a screwdriver to change out the batteries on this device. Yes, it probably will last a while in normal conditions, but if you are shooting in the cold or you need to assure things last as long as the timelapse, then it would make sense to take power from the battery pack (external power) or allow for quick battery changes. Also, some kind of "cage" to mount to 1/4-20" threads would be nice too. I use double Velcro tape to attach this to the side of the Oracle controller. Great device, just not 100% thought out.

Was this review helpful to you?


Browse for more products in the same category as this item:

Products > Motion Control > elektraDRIVE > Controllers
Products > Motion Control