|
The Kessler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds or more. Weighing in at only 10 pounds, with a length of 40.5 inches, 5 inches wide, and a total camera travel distance or 35.5 inches, the CineSlider is a very portable solution to get those quick, smooth short-run dolly movements, without having to transport a large dolly system. Features include drag control and locking, handle with adjustable arc diameter for ultimate movement control, smooth rolling precision stainless steel ball bearing Delrin wheels, and multple mounting options.
The CineSlider™ can be center mounted flush to the Kessler Hercules 2.0 head to achieve panning and tilting movements, center mounted to a 100mm bowl tripod with the optional 100mm Ball Mount Kit, or support from both ends with a combination of a standard tripod / fluid head or lightstand or monopod.
Camera mounting options include the Quick Release Plate & Receiver that comes standard. Also included with the CineSlider™ is a 3/8" standard mounting bolt, for flat mounting a fluid head to the carriage. Optional mounting options include a 100mm Bowl High Hat (coming soon) and 100mm Ball Relocater.
Click here for more information, photos & specifications.
CINESLIDER SHOULD BE BACK IN STOCK AROUND SEPT 1st.
ONCE WE HAVE INVENTORY, WE WILL BEGIN ACCEPTING ORDERS AGAIN.
Kessler CineSlider™ $999.95 OUT OF STOCK
CineSlider™ w/ Hercules 2.0 Head $1,309.95 OUT OF STOCK
CineSlider™ w/ Hercules 2.0 & K-Pod Bundle $1,799.95 OUT OF STOCK
CineSlider™ w/ Hercules 2.0 & K-Pod PLUS Cases (includes CineSlider™ & K-Pod™ cases)
$1,979.95 OUT OF STOCK
We now offer a longer 5 Foot Long CineSlider™. Due to the length of the 5 foot CineSlider™, you will need to support the unit on both ends with tripods, lights stands, etc, or set it on a flat surface. Do not center mount the 5' Long CineSlider on a tripod. Both ends must be supported. If setting on the ground, we recommend the Outrigger Feet for the best support and stability. Due to the length, the 5' CineSlider can ONLY be shipped through UPS.
5 Foot Long CineSlider™
$1,499.95 OUT OF STOCK
OPTIONAL ACCESSORIES
The elektraDRIVE Motor Drive options are available for the CineSlider™. Visit the elektraDRIVE page for options.
 |
CineSlider™ Custom Case
For 3 ft CineSlider™
$69.95
Add to Cart
For 5 ft CineSlider™
$99.95
Add to Cart
|
 |
Hard Travel Case (11413) is an ideal case for your slider and
accessories. The case comes with 'pick & pluck' foam insert, and
there is enough room for your 3' CineSlider or Pocket Dolly, and various accessories.
Dimensions: 47"L x 17"W x 7"H
Click here for photos and specifications .
$269.95
Add to Cart
|
| |
Long Travel Case (13513) is an ideal case for your slider and accessories.This case is similar to the Hard Travel Case for the CineSlider &
Pocket Dolly (11413) but longer, so you can fit more accessories in the
case.
Dimensions: 56"L x 17"W x 7"H
Click here for photos and specifications
$309.95
Add to Cart
|
 |
CineSlider™ / Revolution 100mm Ball Mount for mounting CineSlider™ to 100mm or 75mm (no leveling) bowl tripods.
$69.95
Add to Cart
|
|
|
CineSlider™ 100mm High Hat (includes knob for fluid heads with 3/8" threaded stud)
$119.95
Add to Cart
Optional M10 Knob (for fluid heads with metric M10 threaded stem / stud)
$12.95
Add to Cart
|
 |
Manfrotto 143A Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, with 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads. Load capacity is 5.4 lbs.
$119.95
Add to Cart
|
 |
100mm Ball Relocater
$69.95
Add to Cart
|
 |
Kessler Outrigger Feet are a sturdy adjustable foot system for the CineSlider™ & Pocket Dolly™ sliders. Sold as a set of two. Installation video .
$149.95
Add to Cart
|
 |
Giottos MH7001 Ball Head allows for mounting of Giottos MH621 Q/R on top.Photo below under more info.
$49.95
Add to Cart
|
 |
Flat Mount Adapter to mount your fluid head flush to the Pocket Dolly™ or CineSlider™ carriage.
$24.95
Add to Cart |
Measuring Tape Only
|
Self-Adhesive Measuring Tape for measuring cart movement for calibration or repositioning. Includes American standard and metric units.
For Standard 3' CineSlider™
$12.95 Add to Cart
For 5' CineSlider™
$19.95 Add to Cart
|
|
CineSlider™ 
