|
Want to get smooth, consistent, short-run dolly shots, without having to carry around a dolly system and track? The Pocket Dolly™ is the solution for those shots! At just 38.5" in length and 7.5 pounds, the Pocket Dolly™ is very portable, so you can always get the shot you need, where ever you are. The unique crank handle and belt drive system, allow for approximately 35" of quiet, consistent, smooth camera movement. Cameras weighing up to 15 pounds are supported.
Changes in Version 2.0:
- No IGUS components.
- 100% custom CNC machined firm rail to reduce or eliminate flex.
- Ball bearing wheels for silent, smooth, & frictionless carriage movement, that will not "bind".
- Compatible with Kessler 100mm High Hat.
The Pocket Dolly™v2.0 is smoother than other linear sliders due to our ball bearing wheel design and the carried inertia provided by our handle and belt drive system that gives it a more fluid feel than other sliders.
Plus, with the belt drive you have the option to go to full automation with our elektraDRIVE system that boasts features like time lapse, memory/motion playback, digital dampening and many more options that will make getting that perfect shot easy. Visit the various industry forums and ask about the Pocket Dolly™ and you will find from first hand users, that we offer the best slider on the market today!
Be sure to order the camera mounting option of your choice below. We have learned over time that different customers require different camera mounting options. For this reason, the Pocket Dolly™ comes ready to accept various mounting options from quick release assembly to flat mount adapters to attach a fluid head. You will need choose the mounting option of your choice, to mount a camera to the Pocket Dolly™.
Pocket Dolly™ Promo Video
Click here for more info, videos, & photos.
If mounting the Pocket Dolly™ to a standard fluid head and tripod via a quick release plate, rather than to the Hercules 2.0 head, we recommend using additional support, like a small light stand or monopod. WHY? Click here to read more below.
If you are looking for a slider with more features and higher weight capacity that will work with cameras ranging for lightweight HDSLR cameras like the Canon 5DmkII to heavier cameras like the RED ONE or 35mm adapter rigs, check out the Kessler CineSlider™ .
The elektraDRIVE Motor Drive options are available for the Pocket Dolly™. Visit the elektraDRIVE page for options.
WE ARE ACCEPTING ORDERS AGAIN.
Shipping delays of up to approx 7 - 10 days may occur.
Pocket Dolly™ v2.0 $599.95 Add to Cart (HOT Item! Check availability.)
Pocket Dolly™ v2.0 w/ Hercules 2.0 $899.95 Add to Cart
(HOT Item! Check availability.)
Pocket Dolly™ v2.0 w/ Hercules 2.0 & K-Pod Bundle $1,409.95 Add to Cart
(HOT Item! Check availability.)
CHOOSE CAMERA MOUNTING OPTION(S):
 |
Flat Mount Adapter to mount your fluid head flush to the Pocket Dolly™ carriage.
$24.95
Add to Cart
|
|
|
Giottos MH621 Quick Release Plate & Receiver to mount camera to the Pocket Dolly™ carriage.
$39.95
Add to Cart
|
|
Manfrotto 577 Quick Release Plate & Receiver to mount camera to the Pocket Dolly™ carriage. Compatible
with the 501PL camera plated (supplied with the head 501HDV, 503 and
519 Video Heads) and the special 501PLONG accessory plate.
$69.95
Add to Cart
|
 |
Giottos MH7001 Ball Head allows for mounting of Giottos MH621 Q/R on top. Requires Flat Mount Adapter.
$49.95
Add to Cart
|
POCKET DOLLY™ v2.0 ACCESSORIES
|
|
Pocket Dolly™ V2 Brake used to lock carriage in place on Pocket Dolly V2. Click for installation video.
Shipping Now!
$59.95
Add to Cart
|
 |
Kessler Outrigger Feet are a sturdy adjustable foot system for the CineSlider™ & Pocket Dolly™ sliders. Sold as a set of two. Installation video.
$149.95
Add to Cart
|
 |
Pocket Dolly™ Case
$49.95
Add to Cart
|
 |
Hard Travel Case (11413) is an ideal case for your slider and
accessories. The case comes with 'pick & pluck' foam insert, and
there is enough room for your 3' CineSlider or Pocket Dolly, and various accessories.
Dimensions: 47"L x 17"W x 7"H
Click here for photos and specifications .
$269.95
Add to Cart
|
| |
Long Travel Case (13513) is an ideal case for your slider and accessories.This case is similar to the Hard Travel Case for the CineSlider &
Pocket Dolly (11413) but longer, so you can fit more accessories in the
case.
Dimensions: 56"L x 17"W x 7"H
Click here for photos and specifications
$309.95
Add to Cart
|
|
