The elektraDRIVE Motor Pod is our interchangeable motor drive system for use with our sliders and other elektraDRIVE line of products to be released in the future. We have multiple series of motors with different gear ratios, so you can tailor your motor drive to your needs. Below are the standard motor series we offer, but custom gearing ratios are available, if you have a special need.

Basic (soon to be released) or ORACLE controller and elektraDRIVE Mount for Pocket Dolly or CineSlider are also required.

Click here for more info & overview video .

NOW SHIPPING!

100 Series Motor Pod (100:1)

The 100 Series motor is the suggested normal use  motor for the Pocket Dolly or very fast motor for the CineSlider. This motor has less torque than the 200 or 500 Series motors.

Approximate Dynamic Range for continuous movement at the lowest and highest motor speed settings.

Pocket Dolly - 2min 15 sec/ft (slow)  1.6 sec/ft (fast)

CineSlider - 56 sec/ft (slow) & 0.83 sec/ft (fast) 

$199.95     Add to Cart   

200 Series Motor Pod (264:1)

The 200 Series motor is the suggested Time Lapse (slow) motor for the Pocket Dolly, and the suggested normal use motor for the CineSlider.

Approximate Dynamic Range for continuous movement at the lowest and highest motor speed settings.

Pocket Dolly - 4min 24 sec/ft (slow)  4.3 sec/ft (fast)

$199.95     Add to Cart   

500 Series Motor Pod (516:1)

The 500 Series motor is the suggested Time Lapse (slow) motor for the CineSlider and would be the very slow Time Lapse motor for the Pocket Dolly and has the most torque of the 3 main motors.

Approximate Dynamic Range for continuous movement at the lowest and highest motor speed settings.

Pocket Dolly - 10min 15 sec/ft (slow)  8.7 sec/ft (fast)

$199.95     Add to Cart   

elektraDRIVE BUNDLE PACKAGES

Timelapse Bundle for CineSlider™

Includes:
1 - elektraDRIVE Mount for CineSlider™
1 - elektraDRIVE 500 Series Motor Pod
1 - ORACLE Controller
1 - ORACLE 12v Battery Pack
1 - ORACLE 12v DC Adapter

$1,314.95     Add to Cart   

Timelapse Bundle for Pocket Dolly™

Includes:
1 - elektraDRIVE Mount for Pocket Dolly™
1 - elektraDRIVE 200 Series Motor Pod
1 - ORACLE Controller
1 - ORACLE 12v Battery Pack
1 - ORACLE 12v DC Adapter

$1,314.95     Add to Cart    

elektraDRIVE SPECIALTY MOTORS

50:1 Motor Pod

The 50:1 motor would be used when extremely fast movements are desired.This motor would move at approximately twice the speed of the 100 Series motor.

Approximate Dynamic Range for continuous movement at the lowest and highest motor speed settings.

Pocket Dolly - 1min 7 sec/ft (slow)  0.8 sec/ft (fast)

CineSlider - 28 sec/ft (slow) & 0.41 sec/ft (fast) 

$249.95     Add to Cart   

1000:1 Motor Pod

The 1000:1 motor would be used when ultra slow movements are desired. This motor would move at approximately half the speed of the 500 Series Motor.

Approximate Dynamic Range for continuous movement at the lowest and highest motor speed settings.

Pocket Dolly - 20min 30 sec/ft (slow)  17.4 sec/ft (fast)

CineSlider - 7 min 46 sec/ft (slow) & 7.8 sec/ft (fast) 

$249.95     Add to Cart   

The elektraDRIVE Mounting Kit for the Shuttle Pod™ allows you to mount one of the elektraDRIVE Motor Pods to the Shuttle Pod™. This kit includes the mounting plate with hardware and belt pulley, 12 foot of belt, and belt clamps. The actual elektraDRIVE Motor Pod is NOT INCLUDED.

NOW SHIPPING!

INTRODUCTORY PRICING!

elektraDRIVE Mounting Kit for Shuttle Pod™    $349.95     Add to Cart   

The elektraDRIVE Mount for the Pocket Dolly allows you to mount one of the elektraDRIVE Motor Pods to the Pocket Dolly. This kit includes the mounting plate with hardware and belt pulley. The actual elektraDRIVE Motor Pod is NOT INCLUDED.

The elektraDRIVE Mount & Motor Pod system is NOT compatible with the Pocket Dolly BASIC. The Pocket Dolly must have the crank and belt drive. 

Click here for installation video.

NOW SHIPPING!

elektraDRIVE Mount for Pocket Dolly    $99.95     Add to Cart   

The elektraDRIVE Mount for the CineSlider allows you to mount one of the elektraDRIVE Motor Pods to the CineSlider. This kit includes the mounting plate with hardware and belt pulley. The actual elektraDRIVE Motor Pod is NOT INCLUDED.

Click here for installation video.

NOW SHIPPING!

elektraDRIVE Mount for CineSlider    $99.95     Add to Cart   

The elektraDRIVE BASIC Controller is for use with the elektraDRIVE motor configurations for the Pocket Dolly or CineSlider, when the advanced features of our ORACLE Controller are not needed.

The Basic Controller allows for linear (side to side) movement, with adjustable speed control and has built in 0.5 second of digital dampening for starts / stops.

The BASIC Controller has two modes.

Momentary Mode:
Hold down the direction button and the carriage moves as long as the button is held down. Variable speed can be adjusted "on the fly" while the carriage is in motion.

Continuous Mode:
Press direction button once to begin carriage movement, and press it again to stop it. There are two sub modes in Continous Mode; constant voltage for normal continuous movement and pulse voltage, for ultra slow movement.

The elektraDRIVE BASIC Controller is only for use with the slider configurations. It is NOT compatible with the Revolution Pan / Tilt Head.

Included in the Package:

• 1 - elektraDRIVE Basic Controller
• 1 - 120v AC Power Supply w/Wall Plug
• 1 - 5ft CAT5 Cable

NOW SHIPPING!!

elektraDRIVE BASIC Controller Only      $249.95     Add to Cart    

OPTIONAL ACCESSORIES:

	elektraDRIVE 12v DC Power Adapter to power ORACLE Controller with a DC power source. $19.95    Add to Cart
	elektraDRIVE 12v Battery to power ORACLE Controller, REVOLUTION, & elektraDRIVE motors. Requires ORACLE 12v DC Adapter $129.95    Add to Cart

The ORACLE Control System is the core of our elektraDRIVE line of products. Almost two years in development, we set out to make the ultimate multi-function controller for our line of electronic products. The ORACLE Control System is interchangeable between multiple products, like our REVOLUTION Pan / Tilt System, elektraDRIVE motor pods for the CineSlider & Pocket Dolly, and other products to be released in the future.

Click here for more info & overview video .

Supported Features & Specifications:

• Backlite LCD display with menu and setting values.
• Fully adjustable controls for Max Speed, Dampening, & Dead Band.
• Movement Recording / Memory Function with three memory banks.
• Time Lapse control
• Premium Multi-Function Joystick
• Joystick orientation can be easily set in the menu.
• Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable). NO EXPENSIVE PROPRIETARY CABLES!!
• Powered by standard AC power supply with wall plug, or optional 12v DC adapter and battery pack.

The ORACLE Controller can only control either the Revolution Head or an elektraDRIVE motor at one time. To perform 3-axis movements with both the Revolution Head and a elektraDRIVE motor for a slider at the same time, you will need two controllers.

Included in the Package:

• 1 - ORACLE Controller
• 1 - 120v AC Power Supply w/Wall Plug
• 1 - 25ft CAT5 Cable

NOW SHIPPING!

Retail Price: $1,199.95 

ORACLE Controller Only      $999.95     Add to Cart   

REVOLUTION Pan / Tilt Head with ORACLE Controller     $1799.95     Add to Cart   

OPTIONAL ACCESSORIES:

	CineSlider™ / Revolution 100mm Ball Mount  $69.95   Add to Cart
	elektraDRIVE 12v DC Power Adapter to power ORACLE Controller with a DC power source. $19.95    Add to Cart
	elektraDRIVE 12v Battery to power ORACLE Controller, REVOLUTION, & elektraDRIVE motors. Requires ORACLE 12v DC Adapter $129.95    Add to Cart

The Kessler REVOLUTION Pan and Tilt System is our answer to the need for an affordable, quality motorized pan & tilt head. After two years of development, we have produced a motorized head that addresses the failings of other pan / tilt heads in this price range. When paired with the ORACLE Controller, we honestly feel the REVOLUTION is the most feature rich and best motorized head solution on the market, for under $5000.

REVOLUTION Head Features & Specifications

• Billet aluminum with stainless steel hardware construction.
• Dual motors for each axis, provide zero backlash and 100% holding power (no drifting).
• Superior Dynamic Range. Unit is both faster and slower than other heads at similar price point.
• Ball bearing and belt drive to eliminate gear to gear noise.
• Pass-through axle points, for easy cable routing.
• Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable). NO EXPENSIVE PROPRIETARY CABLES!!
• Unit Weight: 10 lbs.
• Weight Capacity: 20 lbs.

ORACLE Controller Supported Features & Specifications: Backlite LCD display with menu and setting values. Fully adjustable controls for Max Speed, Dampening, & Dead Band. Movement Recording / Memory Function with three memory banks. Time Lapse control Premium Multi-Function Joystick Joystick orientation can be easily set in the menu. Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable). NO EXPENSIVE PROPRIETARY CABLES!! Powered by standard AC power supply with wall plug, or optional 12v DC adapter and battery pack.

The ORACLE Controller can only control either the Revolution Head or an elektraDRIVE motor at one time. To perform 3-axis movements with both the Revolution Head and an elektraDRIVE motor for a slider at the same time, you will need two controllers. 

Retail Price: $1,199.95

REVOLUTION Head Only      $999.95     Add to Cart   

REVOLUTION Pan / Tilt Head with ORACLE Controller     $1799.95     Add to Cart   

OPTIONAL ACCESSORIES:

	elektraDRIVE / Revolution Hard Case Custom cut foam insert holds Revolution, ORACLE, 3 elektraDRIVE motor pods, 2 elektraDRIVE mounts, battery pack, & cables. Click here for more photos  $229.95     Add to Cart
	CineSlider™ / Revolution 100mm Ball Mount  $69.95   Add to Cart
	elektraDRIVE 12v DC Power Adapter to power ORACLE Controller with a DC power source. $19.95    Add to Cart
	elektraDRIVE 12v Battery to power ORACLE Controller, REVOLUTION, & elektraDRIVE motors. Requires ORACLE 12v DC Adapter $129.95    Add to Cart

Hardshell case with custom waterjet cut foam insert will hold Revolution Pan/Tilt Head, ORACLE Controller, 3 elektraDRIVE motor pods, 2 elektraDRIVE mounts, battery pack, cables and small accessories. Includes wheels and telescopic pull handle.

25"L x 15"W x 10"D

Click here for more photos

$229.95     Add to Cart