The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly. You can also use our proprietary expandable rail system (available soon) if you do not have a Kessler Crane. The Shuttle Pod™ has multiple optional camera mounting options available, but the most common are the 100mm High Hat, to allow the mounting of a 100mm ball fluid head, or the Bogen Magic Arm. Click here for Shuttle Pod™ review and tutorial blog by Tom Guilmette .

The Shuttle Pod™ is completely smooth and silent and can even me removed and used as a table top dolly, by rolling on a smooth surface.

NOW SHIPPING!

INTRODUCTORY PRICING! 

Kessler Shuttle Pod™    $599.95     Add to Cart   

The elektraDRIVE Motor Drive options are available for the Shuttle Pod™. Visit the elektraDRIVE page for options.  

	Kessler 100mm High Hat (includes knob for fluid heads with 3/8" threaded stud)  $119.95   Add to Cart     Optional M10 Knob (for fluid heads with metric M10 threaded stem / stud) $12.95    Add to Cart
	Manfrotto 143A Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, with 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads. Load capacity is 5.4 lbs.   $119.95    Add to Cart
	Giottos MH7001 Ball Head allows for mounting of Giottos MH621 Q/R on top. Flat Mount Adapter required to mount to Shuttle Pod. $49.95   Add to Cart
	Giottos MH621 Quick Release Plate & Receiver to mount camera to the Pocket Dolly™ carriage.   $39.95   Add to Cart
	Flat Mount Adapter to mount your fluid head flush to the Pocket Dolly™, CineSlider™ or Shuttle Pod carriage. $24.95    Add to Cart
	The elektraDRIVE Mounting Kit for the Shuttle Pod™ allows you to mount one of the elektraDRIVE Motor Pods to the Shuttle Pod™. This kit includes the mounting plate with hardware and belt pulley, 12 foot of belt, and belt clamps. The actual elektraDRIVE Motor Pod is NOT INCLUDED. INTRODUCTORY PRICING!  $349.95     Add to Cart

The Kessler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds or more. Weighing in at only 10 pounds, with a length of 40.5 inches, 5 inches wide, and a total camera travel distance or 35.5 inches, the CineSlider is a very portable solution to get those quick, smooth short-run dolly movements, without having to transport a large dolly system. Features include drag control and locking, handle with adjustable arc diameter for ultimate movement control, smooth rolling precision stainless steel ball bearing Delrin wheels, and multple mounting options.

The CineSlider™ can be center mounted flush to the Kessler Hercules 2.0 head to achieve panning and tilting movements, center mounted to a 100mm bowl tripod with the optional 100mm Ball Mount Kit, or support from both ends with a combination of a standard tripod / fluid head or lightstand or monopod.

Camera mounting options include the Quick Release Plate & Receiver that comes standard. Also included with the CineSlider™ is a 3/8" standard mounting bolt, for flat mounting a fluid head to the carriage. Optional mounting options include a 100mm Bowl High Hat (coming soon) and 100mm Ball Relocater.

Click here for more information, photos & specifications.

CINESLIDER SHOULD BE BACK IN STOCK AROUND SEPT 1st.

ONCE WE HAVE INVENTORY, WE WILL BEGIN ACCEPTING ORDERS AGAIN.

Kessler CineSlider™   $999.95     OUT OF STOCK

CineSlider™ w/ Hercules 2.0 Head   $1,309.95     OUT OF STOCK 

CineSlider™ w/ Hercules 2.0 & K-Pod Bundle    $1,799.95     OUT OF STOCK

CineSlider™ w/ Hercules 2.0 & K-Pod PLUS Cases (includes CineSlider™ & K-Pod™ cases)

$1,979.95     OUT OF STOCK

We now offer a longer 5 Foot Long CineSlider™. Due to the length of the 5 foot CineSlider™, you will need to support the unit on both ends with tripods, lights stands, etc, or set it on a flat surface. Do not center mount the 5' Long CineSlider on a tripod. Both ends must be supported. If setting on the ground, we recommend the Outrigger Feet for the best support and stability. Due to the length, the 5' CineSlider can ONLY be shipped through UPS.

5 Foot Long CineSlider™

$1,499.95     OUT OF STOCK

OPTIONAL ACCESSORIES

The elektraDRIVE Motor Drive options are available for the CineSlider™. Visit the elektraDRIVE page for options.  

	CineSlider™ Custom Case For 3 ft CineSlider™ $69.95    Add to Cart    For 5 ft CineSlider™ $99.95    Add to Cart
	Hard Travel Case (11413) is an ideal case for your slider and accessories. The case comes with 'pick & pluck' foam insert, and there is enough room for your 3' CineSlider or Pocket Dolly, and various accessories. Dimensions: 47"L x 17"W x 7"H Click here for photos and specifications .   $269.95 Add to Cart
	Long Travel Case (13513) is an ideal case for your slider and accessories.This case is similar to the Hard Travel Case for the CineSlider & Pocket Dolly (11413) but longer, so you can fit more accessories in the case. Dimensions: 56"L x 17"W x 7"H Click here for photos and specifications  $309.95       Add to Cart
	CineSlider™ / Revolution 100mm Ball Mount for mounting CineSlider™ to 100mm or 75mm (no leveling) bowl tripods. $69.95   Add to Cart
	CineSlider™ 100mm High Hat (includes knob for fluid heads with 3/8" threaded stud)  $119.95   Add to Cart     Optional M10 Knob (for fluid heads with metric M10 threaded stem / stud) $12.95    Add to Cart
	Manfrotto 143A Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, with 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads. Load capacity is 5.4 lbs.   $119.95    Add to Cart
	100mm Ball Relocater $69.95   Add to Cart
	Kessler Outrigger Feet are a sturdy adjustable foot system for the CineSlider™ & Pocket Dolly™ sliders. Sold as a set of two. Installation video . $149.95   Add to Cart
	Giottos MH7001 Ball Head allows for mounting of Giottos MH621 Q/R on top.Photo below under more info. $49.95   Add to Cart
	Flat Mount Adapter to mount your fluid head flush to the Pocket Dolly™ or CineSlider™ carriage. $24.95    Add to Cart
Measuring Tape Only	Self-Adhesive Measuring Tape for measuring cart movement for calibration or repositioning. Includes American standard and metric units. For Standard 3' CineSlider™ $12.95   Add to Cart   For 5' CineSlider™ $19.95   Add to Cart

New Version 2.0!!

Want to get smooth, consistent, short-run dolly shots, without having to carry around a dolly system and  track? The Pocket Dolly™ is the solution for those shots! At just 38.5" in length and 7.5 pounds, the Pocket Dolly™ is very portable, so you can always get the shot you need, where ever you are. The unique crank handle and belt drive system, allow for approximately 35" of quiet, consistent, smooth camera movement. Cameras weighing up to 15 pounds are supported.

Changes in Version 2.0:

• No IGUS components.
• 100% custom CNC machined firm rail to reduce or eliminate flex.
• Ball bearing wheels for silent, smooth, & frictionless carriage movement, that will not "bind".
• Compatible with Kessler 100mm High Hat.

The Pocket Dolly™v2.0 is smoother than other linear sliders due to our ball bearing wheel design and the carried inertia provided by our handle and belt drive system that gives it a more fluid feel than other sliders.

Plus, with the belt drive you have the option to go to full automation with our elektraDRIVE system that boasts features like time lapse, memory/motion playback, digital dampening and many more options that will make getting that perfect shot easy. Visit the various industry forums and ask about the Pocket Dolly™ and you will find from first hand users, that we offer the best slider on the market today!  

Be sure to order the camera mounting option of your choice below. We have learned over time that different customers require different camera mounting options. For this reason, the Pocket Dolly™ comes ready to accept various mounting options from quick release assembly to flat mount adapters to attach a fluid head. You will need choose the mounting option of your choice, to mount a camera to the Pocket Dolly™.

Pocket Dolly™ Promo Video
Click here for more info, videos, & photos.

If mounting the Pocket Dolly™ to a standard fluid head and tripod via a quick release plate, rather than to the Hercules 2.0 head, we recommend using additional support, like a small light stand or monopod. WHY? Click here to read more below.

If you are looking for a slider with more features and higher weight capacity that will work with cameras ranging for lightweight HDSLR cameras like the Canon 5DmkII to heavier cameras like the RED ONE or 35mm adapter rigs, check out the Kessler CineSlider™ .

The elektraDRIVE Motor Drive options are available for the Pocket Dolly™. Visit the elektraDRIVE page for options. 

WE ARE ACCEPTING ORDERS AGAIN.

Shipping delays of up to approx 7 - 10 days may occur.

Pocket Dolly™ v2.0    $599.95    Add to Cart  (HOT Item! Check availability.)

Pocket Dolly™ v2.0 w/ Hercules 2.0    $899.95    Add to Cart   (HOT Item! Check availability.)

Pocket Dolly™ v2.0 w/ Hercules 2.0 & K-Pod Bundle   $1,409.95    Add to Cart   (HOT Item! Check availability.)

CHOOSE CAMERA MOUNTING OPTION(S):

	Flat Mount Adapter to mount your fluid head flush to the Pocket Dolly™ carriage. $24.95    Add to Cart
	Giottos MH621 Quick Release Plate & Receiver to mount camera to the Pocket Dolly™ carriage.   $39.95   Add to Cart
	Manfrotto 577 Quick Release Plate & Receiver to mount camera to the Pocket Dolly™ carriage. Compatible with the 501PL camera plated (supplied with the head 501HDV, 503 and 519 Video Heads) and the special 501PLONG accessory plate. $69.95   Add to Cart
	Giottos MH7001 Ball Head allows for mounting of Giottos MH621 Q/R on top. Requires Flat Mount Adapter. $49.95   Add to Cart

POCKET DOLLY™ v2.0 ACCESSORIES

	Pocket Dolly™ V2 Brake used to lock carriage in place on Pocket Dolly V2. Click for installation video. Shipping Now!  $59.95   Add to Cart
	Kessler Outrigger Feet are a sturdy adjustable foot system for the CineSlider™ & Pocket Dolly™ sliders. Sold as a set of two. Installation video. $149.95   Add to Cart
	Pocket Dolly™ Case $49.95     Add to Cart
	Hard Travel Case (11413) is an ideal case for your slider and accessories. The case comes with 'pick & pluck' foam insert, and there is enough room for your 3' CineSlider or Pocket Dolly, and various accessories. Dimensions: 47"L x 17"W x 7"H Click here for photos and specifications .   $269.95 Add to Cart
	Long Travel Case (13513) is an ideal case for your slider and accessories.This case is similar to the Hard Travel Case for the CineSlider & Pocket Dolly (11413) but longer, so you can fit more accessories in the case. Dimensions: 56"L x 17"W x 7"H Click here for photos and specifications  $309.95       Add to Cart

BASIC V1 shown. V2 photo coming soon

Shown with Optional Giottos Quick Release

The Pocket Dolly™ BASIC V2 gives you the same smooth movement as our standard Pocket Dolly™V2 , but without the crank handle system. Get smooth, consistent, short-run dolly shots, without having to carry around a dolly system and track. At just 38" in length and 6 pounds, the Pocket Dolly™ BASIC is very portable, so you can always get the shot you need, where ever you are. Cameras weighing up to 15 pounds are supported, with the Pocket Dolly™ BASIC mounted flush to our Hercules 2.0 head on our K-Pod System™ tripod, with no additional supports needed.

Changes in Version 2.0:

• No IGUS components.
• 100% custom CNC machined firm rail to reduce or eliminate flex.
• Ball bearing wheels for silent, smooth, & frictionless carriage movement, that will not "bind".
• Compatible with Kessler 100mm High Hat.

Be sure to order the camera mounting option of your choice below. We have learned over time that different customers require different camera mounting options. For this reason, the Pocket Dolly™ comes ready to accept various mounting options from quick release assembly to flat mount adapters to attach a fluid head. You will need choose the mounting option of your choice, to mount a camera to the Pocket Dolly™.

If mounting the Pocket Dolly™ BASIC to a standard fluid head and tripod via a quick release plate, rather than to the Hercules 2.0 head, we recommend using additional support, like a small light stand or monopod. WHY? Click here to read more below.

If you are looking for a slider with more features and higher weight capacity that will work with cameras ranging for lightweight HDSLR cameras like the Canon 5DmkII to heavier cameras like the RED ONE or 35mm adapter rigs, check out the Kessler CineSlider™ .

WE ARE ACCEPTING ORDERS AGAIN.

Shipping delays of up to approx 7 - 10 days may occur.

Pocket Dolly™ BASIC V2  $449.95    Add to Cart  

Pocket Dolly™ BASIC V2 w/ Hercules 2.0    $759.95    Add to Cart   

Pocket Dolly™BASIC V2 w/ Hercules 2.0 & K-Pod Bundle   $1,349.95    Add to Cart   

CHOOSE CAMERA MOUNTING OPTION(S):

	Flat Mount Adapter to mount your fluid head flush to the Pocket Dolly™ carriage. $24.95    Add to Cart
	Giottos MH621 Quick Release Plate & Receiver to mount camera to the Pocket Dolly™ carriage.   $39.95   Add to Cart
	Manfrotto 577 Quick Release Plate & Receiver to mount camera to the Pocket Dolly™ carriage. Compatible with the 501PL camera plated (supplied with the head 501HDV, 503 and 519 Video Heads) and the special 501PLONG accessory plate. $69.95   Add to Cart
	Giottos MH7001 Ball Head allows for mounting of Giottos MH621 Q/R on top. Requires Flat Mount Adapter. $49.95   Add to Cart

POCKET DOLLY™ ACCESSORIES

	Pocket Dolly™ V2 Brake used to lock carriage in place on Pocket Dolly V2. Click for installation video. Shipping Now!  $59.95   Add to Cart
	Kessler Outrigger Feet are a sturdy adjustable foot system for the CineSlider™ & Pocket Dolly™ sliders. Sold as a set of two. Installation video. $149.95   Add to Cart
	Pocket Dolly™ Case $49.95     Add to Cart
	Hard Travel Case (11413) is an ideal case for your slider and accessories. The case comes with 'pick & pluck' foam insert, and there is enough room for your 3' CineSlider or Pocket Dolly, and various accessories. Dimensions: 47"L x 17"W x 7"H Click here for photos and specifications .   $269.95 Add to Cart
	Long Travel Case (13513) is an ideal case for your slider and accessories.This case is similar to the Hard Travel Case for the CineSlider & Pocket Dolly (11413) but longer, so you can fit more accessories in the case. Dimensions: 56"L x 17"W x 7"H Click here for photos and specifications  $309.95       Add to Cart

New Version 2.0!!

Pocket Dolly™ TRAVELER v2.0 (with belt & crank) shown.

The TRAVELER length is a shorter, 26.5" long & 5 lbs version of our standard Pocket Dolly™ (w/crank) & Pocket Dolly™ BASIC (without crank). We developed this after feedback from our customers that stated they loved our Pocket Dolly™, but would like to have a shorter version that they could easily throw in a backpack or bag for easier traveling. Both versions of our Pocket Dolly™ (standard with crank and belt drive & BASIC without crank and belt drive) are available in the TRAVELER size.

Want to get smooth, consistent, short-run dolly shots, without having to carry around a dolly system and  track? The Pocket Dolly™ is the solution for those shots! The Pocket Dolly™ is very portable, so you can always get the shot you need, where ever you are. The TRAVELER size allows for approximately 23" of quiet, consistent, smooth camera movement. Cameras weighing up to 15 pounds are supported. Because of the shorter length, the TRAVELER size Pocket Dolly™ can be center mounted to any sturdy tripod fluid head with a quick plate that attaches with a standard 3/8" mount.

Changes in Version 2.0:

• No IGUS components.
• 100% custom CNC machined firm rail to reduce or eliminate flex.
• Ball bearing wheels for silent, smooth, & frictionless carriage movement, that will not "bind".
• Compatible with Kessler 100mm High Hat.

The Pocket Dolly™v2.0 is smoother and quieter than other linear sliders due to our ball bearing wheel design and the carried inertia provided by our handle and belt drive system (handle & belt not on the BASIC models) that gives it a more fluid feel than other sliders.

Plus, with the models with crank & belt drive you have the option to go to full automation with our elektraDRIVE system that boasts features like time lapse, memory/motion playback, digital dampening and many more options that will make getting that perfect shot easy. Visit the various industry forums and ask about the Pocket Dolly™ and you will find from first hand users, that we offer the best slider on the market today!  

Be sure to order the camera mounting option of your choice below. We have learned over time that different customers require different camera mounting options. For this reason, the Pocket Dolly™ comes ready to accept various mounting options from quick release assembly to flat mount adapters to attach a fluid head. You will need choose the mounting option of your choice, to mount a camera or fluid head to the Pocket Dolly™.

Pocket Dolly™ Promo Video
Click here for more info, videos, & photos.

If you are looking for a slider with more features and higher weight capacity that will work with cameras ranging for lightweight HDSLR cameras like the Canon 5DmkII to heavier cameras like the RED ONE or 35mm adapter rigs, check out the Kessler CineSlider™ .

WE ARE ACCEPTING ORDERS AGAIN.

Shipping delays of up to approx 7 - 10 days may occur.

Pocket Dolly™ v2.0 TRAVELER (w/ crank & belt)  

$579.95    Add to Cart 

Pocket Dolly™ v2.0 TRAVELER (w/ crank & belt) w/ Hercules 2.0 Combo  

$879.95    Add to Cart 

Pocket Dolly™ Basic TRAVELER does not have the belt or crank system, and is NOT compatible with the elektraDRIVE System.

Pocket Dolly™ Basic TRAVELER (without crank & belt)  

$429.95    Add to Cart  (HOT Item! Check availability.)

Pocket Dolly™ Basic TRAVELER (without crank & belt) w/ Hercules 2.0 Combo  

$739.95    Add to Cart   (HOT Item! Check availability.)

CHOOSE CAMERA MOUNTING OPTION(S):

	Flat Mount Adapter to mount your fluid head flush to the Pocket Dolly™ carriage. $24.95    Add to Cart
	Giottos MH621 Quick Release Plate & Receiver to mount camera to the Pocket Dolly™ carriage.   $39.95   Add to Cart
	Manfrotto 577 Quick Release Plate & Receiver to mount camera to the Pocket Dolly™ carriage. Compatible with the 501PL camera plated (supplied with the head 501HDV, 503 and 519 Video Heads) and the special 501PLONG accessory plate. $69.95   Add to Cart
	Giottos MH7001 Ball Head allows for mounting of Giottos MH621 Q/R on top. Requires Flat Mount Adapter. $49.95   Add to Cart

POCKET DOLLY™ ACCESSORIES

	Pocket Dolly™ V2 Brake used to lock carriage in place on Pocket Dolly V2. Click for installation video. Shipping Now!  $59.95   Add to Cart
	Kessler Outrigger Feet are a sturdy adjustable foot system for the CineSlider™ & Pocket Dolly™ sliders. Sold as a set of two. Installation video. $149.95   Add to Cart
	Pocket Dolly™ TRAVELER Case is for the short TRAVELER sized Pocket Dolly.   $49.95     Add to Cart
	Hard Travel Case (11413) is an ideal case for your slider and accessories. The case comes with 'pick & pluck' foam insert, and there is enough room for your 3' CineSlider or Pocket Dolly, and various accessories. Click here for photos and specifications .   $269.95 Add to Cart
	Long Travel Case (13513) is an ideal case for your slider and accessories.This case is similar to the Hard Travel Case for the CineSlider & Pocket Dolly (11413) but longer, so you can fit more accessories in the case. Dimensions: 56"L x 17"W x 7"H Click here for photos and specifications  $309.95       Add to Cart

The new Hard Travel Case is an ideal case for your slider and accessories. The case comes with 'pick & pluck' foam insert, and there is enough room for your 3' CineSlider or Pocket Dolly, elektraDRIVE accessories, mounts, & even a Hercules 2.0 head. The case is sealed, with a purge valve, has jam-free latches, wheels with bearings, side handles and a large front handle, making this the perfect case for air travel.

Click here for photos and specifications .

$269.95       Add to Cart  

The Long Travel Case (13513) is an ideal case for your slider and accessories. The case comes with 'pick & pluck' foam insert, and there is enough room for your 3' CineSlider or Pocket Dolly, elektraDRIVE accessories, mounts, & even a Hercules 2.0 head. The case is sealed, with a purge valve, has jam-free latches, wheels with bearings, side handles and a large front handle, making this the perfect case for air travel.

This case is similar to the Hard Travel Case for the CineSlider & Pocket Dolly (11413) but longer, so you can fit more accessories in the case.

Approximate External Dimensions: 56"L x 17"W x 7"H

Click here for photos and specifications .

$309.95       Add to Cart  

Kessler Outrigger Feet are a sturdy adjustable foot system for the CineSlider™ & Pocket Dolly™ sliders. Sold as a set of two.

Click here for more photos and installation video.

$149.95    Add to Cart   

 Easily transport your Kessler Pocket Dolly™ with this nice soft carry case.

$49.95     Add to Cart      

K-Pod™ not included

The Kessler K-Flex Dolly Track System is an extremely portable, seamless, flexible dolly track system.  The K-Flex Track is a solid, rigid cord, but still very flexible and can be configured in a straight run, or curved in almost any radius or direction (as tight as a 9" radius). Each 50' roll can either be looped to create a 22' run, or paired with a second roll for a continuous run of 50'.

Recommended for use with the Kessler K-Pod System™ with Track Dolly Trucks*, but should also work with other dolly systems that are compatible with 1.25" diameter track. Weight capacity 300 lbs. Custom case now available.

Click here for more info and photos .

K-Flex Track (50' Roll)   $289.95   Add to Cart     

K-Flex Carry Case   $99.95     Add to Cart

If you are interested in bundles that include the K-Flex track and K-Pod, check out the bundle options here.

 
New Design!! 

The K-Flex Case is the perfect way to transport your K-Flex Track to your shoots. The case has a rigid CORDURA® fabric wrapped shell, two side grab handles making it easy to move a 50' roll of K-Flex Track. Dimensions are 24" in diameter and 9" deep.

$99.95     Add to Cart    

This bundle includes items to use your K-Pod™ as a dolly.This kit includes the Premium Track Dolly Trucks in the bundle.

* If using with flexible track, like our K-Flex Track, we highly recommend either the 3" or 7" Idler Arm Upgrade for the best possible performance. If using K-Pod and Dolly Trucks on standard 24" wide doorway dolly track, you will need to purchase the 7" Idler Arm.

Includes:
K-Pod™ Premium Track Dolly Trucks (set of 3)
K-Pod™ Seat / Low-Boy Mount
K-Pod™ Push / Pull Handle

$599.95    Add to Cart

This bundle includes items to use your K-Pod™ as a dolly with K-Flex track.This upgrade kit does NOT include a K-Pod tripod or any cases.

Includes:
K-Pod™ Premium Track Dolly Trucks (set of 3)
K-Pod™ 3" Idler Arm
K-Flex Track (50' Roll)

$699.95    Add to Cart

This bundle includes the dolly accessories of the K-Pod Complete Dolly Ultimate, without the K-Pod tripod or Hercules 2.0.This upgrade kit does NOT include a K-Pod tripod.

Includes:
K-Pod™ Premium Track Dolly Trucks (set of 3)
K-Pod™ 3" Idler Arm
K-Pod™ Seat/Low-Boy Mount
K-Pod™ Push / Pull Handle
K-Flex Track (50' Roll)
K-Flex Track Case

$1,009.95    Add to Cart

This Complete K-Pod System™ bundle contains the following items. The Hercules 2.0 head is available as an option for this bundle.

Includes:
K-Pod™ w/ Soft Case
K-Pod™ Premium Track Dolly Trucks (set of 3)
K-Pod™ 3" Idler Arm (1)
K-Flex Track (50')
K-Flex Track Case

K-Pod™ - Dolly Deluxe    $1,325.95    Add to Cart

K-Pod™ - Dolly Deluxe w/ Hercules 2.0   $1,639.95   Add to Cart

This Complete K-Pod System™ bundle contains the following items. The Hercules 2.0 head is available as an option for this bundle.

Includes:
K-Pod™ w/ Soft Case
K-Pod™ Premium Track Dolly Trucks (set of 3)
K-Pod™ 3" Idler Arm (1)
K-Pod™ Seat / Low-Boy Mount
K-Pod™ Push / Pull Bar

K-Pod™ - Dolly Ultra    $1,269.95    Add to Cart

K-Pod™ - Dolly Ultra w/ Hercules 2.0   $1,584.95   Add to Cart

This Complete K-Pod System™ bundle contains the following items. The Hercules 2.0 head is available as an option for this bundle.

Includes:
K-Pod™ w/ Soft Case
K-Pod™ Premium Track Dolly Trucks (set of 3)
K-Pod™ 3" Idler Arm (1)
K-Pod™ Seat / Low-Boy Mount
K-Pod™ Push / Pull Bar
K-Flex Track (50')
K-Flex Track Case

K-Pod™ - Dolly Ultimate    $1,565.95    Add to Cart

K-Pod™ - Dolly Ultimate w/ Hercules 2.0   $1,879.95   Add to Cart