Explore another configuration option for your weights with this extended weight bar. This package will still allow you to use the factory weight bar for fine tuning as well as provide extra surface area for other accessories such as zoom control or a monitor. The extended weight bar is a must when using larger cameras as it provides more leverage by moving the weight further away from center.

 Weight Bar Instructions 167.78 Kb


$79.95   Add to Cart 

No longer struggle to see your LCD display or reach your zoom/focus controls while operating your crane. With the Kessler Rear Control Center, you can easily mount your display‡, as well as zoom/focus and motorized head controls in a more ergonomic position. The unit is fully adjustable and will pivot, as you raise and lower your crane, so the LCD is always viewable and the controls are at your finger tips.

The Kessler Rear Control Center simply attaches to your extended weight bar* assembly, making controlling your crane and accessing your camera controls a breeze. When removed, the unit easily folds for storage.

‡ Optional monitor mount not included 

* Kessler Extended Weight Bar Upgrade is required. 

Click here for installation video and photos .

 $129.95       Add to Cart    (ON BACKORDER)

For the ultimate shot enthusiast, Kessler Crane® provides a 12 foot upgrade. Combine this extension kit with your 5 1/2 foot crane and the long tip or your 8 foot crane to convert your Kessler Crane® to its maximum height. With a 4 foot midsection piece and a support cable system, this rig can take the weight of your production grade camera and still give you those breathtaking overheads. Don't worry the set up is still quick and easy.

$299.99  Add to Cart 

If you have an HD crane, you will also need the control rod upgrade below:

Mid Section Control Rod Upgrade $49.95  Add to Cart
(includes coupler bar & 2 stainless thumb screws) 

The Kessler 18' Upgrade Kit will upgrade your 12' Kessler Crane to an 18' crane, giving a total reach of 13.5 feet. Included in the upgrade kit is the Extension Section, 18' Tail Extension, 18' Cable Supports and Cable Kits. You must have a 12' Kessler Crane with the Heavy Duty (square) Control Rods, & 'V3' Mounting Plate. The 'V3' mounting plate is identified by the "V3" engraving in the top of the mounting plate (plate used to mount the crane to the tripod head).

Max. Camera Weight: 20 pounds

Please click here to read safety precautions and view the installation video.

18' Crane Upgrade Kit   $799.95    Add to Cart     

If you currently have a KC-8 and need the 12' Upgrade, Heavy Duty Control Rods or need to upgrade to the 'V3' Mounting Plate, you can order those accessories below.

12' Crane Upgrade Kit

Heavy Duty Control Rods

V3 Mounting Plate   $59.95     Add to Cart  

Add this cable support upgrade kit to your KC 8 crane for greater support and stability. (Cable kit includes, cable, 2 cable upright supports and tool less knobs.)

 Support Cables Installation Instructions

$59.95   Add to Cart 

If you already have a KC 12/8 crane, you can use this 8ft Support Cable when your crane is configured for the  8 ft version. The cable support will give your crane greater support and stability. This is the cable only.

 Support Cables Installation Instructions 

$34.95   Add to Cart 

This extension tip provides the piece needed to complete the conversion of the 5 1/2 foot Kessler Crane® to the 8 foot model. If you have the basic version, discover new shot possibilities with this upgrade. More camera travel without compromising the fluid motion you love. This piece is necessary when further upgrading to the 12 foot crane.

$149.95  Add to Cart   

If you have an HD crane, you will also need the control rod upgrade below:

Long Tip Control Rod Upgrade $39.95 Add to Cart

Diversify! Get the most out of your Kessler Crane™. If you have purchased our 8’ or 12’ crane model, using this tip will give you the 5.5 ft option. The short tip will give you a 3’ drop and equal lift for a total of six feet of camera travel.

$129.95  Add to Cart   

If you have an HD crane, you will also need the control rod upgrade below:

Short Tip Control Rod Upgrade $29.95   Add to Cart

When the Kessler Crane® is not in motion protect it from unwanted vertical movement with this braking system. Simply tighten the knob and the crane will stay in the angle you place it allowing you to film locked down static shots as well.

Visit our Video Gallery to view a demonstration of this product. 

$49.95   Add to Cart 

 Vertical Brake Instructions 177.99 Kb

When you want to rest the Kessler Crane® use this clamp mount with any standard lighting stand. In addition to protecting your crane from accidental motion, it also allows you to accomplish standard tripod shots using the steadied basket without tearing down the crane to access your base.

Visit our Video Gallery to view a demonstration of this product.

$39.95    Add to Cart

For those of you who are pushing the weight limits of the crane or just want to be equiped with premium accessories, the Ultra Duty Control Rod is for you. Replace your existing t-bar with this kit for optimal stability during operation of your crane especially under heavy weight load conditions.

 ultra_control_rod_instructions 169.65 Kb

Short Tip  $29.95  Add to Cart

Long Tip  $39.95  Add to Cart

Base Section  $49.95  Add to Cart
(includes coupler bar & 2 stainless thumb screws)

Mid Section  $49.95  Add to Cart
(includes coupler bar & 2 stainless thumb screws)

Tool-less Package Not a glorified wing nut! Upgrade your crane and add time and convenience to your shoot. Eliminate the need for tools by using these hand knobs making setup and tear down more efficient. When tightened, the integrated threading system locates and centers the coupling bars and accurately pulls sections together for a more secure fit.

Use our TOOL LESS Half Kit when you already have the KC-8 TOOL LESS Kit and upgrade your crane to a KC-12. 

Visit our Video Gallery to view a demonstration of this product.

TOOL LESS KC-8 & 5.5:   $39.95  Add to Cart

TOOL LESS Half Kit:   $39.95     Add to Cart

TOOL LESS KC-12:   $59.95   Add to Cart

For those of you with ENG or large broadcast cameras, this kit is for you. This hardware allows your quick release plate to mount to the Kessler Crane® keeping the camera from swiveling with twice the holding power. The slots in the camera basket allow you to quickly find the center of gravity regardless of lens size and limit the stress on the crane.

$12.95    Add to Cart

Keep your set up tidy with this set of 4 loop-thru Velcro straps to secure those wayward cables along the rails of your crane.

$7.95    Add to Cart

With our Quick Collar there is no need to keep track of an Allen wrench to be able to tighten or loosen your weight collar. Each Quick Collar has an indexable handle, for each adjustments.

Single Quick Collar    $12.95     Add to Cart

Set of 4 Quick Collars    $39.95     Add to Cart

Use the Ball Relocater to attach your 100mm ball to the end of your rig. The Relocater mounts to the camera basket using four wing bolts to allow leveling independent from the crane.

Click here for more info.  

$69.95   Add to Cart

Four fine tuning weights for a total of 1 pound, to fine tune the balance of your crane. Weights can be adjusted along the weight bar and locked into place for the perfect balance. Can also be used to hold your counter balance weights in place.

Fine Tuning Weights    $12.95     Add to Cart

 
New Product!!

The Kessler Utility Holster is a 5.5" deep nylon holder great for holding your beverage of choice, as well as other tools and accessories. There is a 3" diameter main pouch, great for holding your drink, as well as a 3.5" x 3.5" netted pocket to hold your cell phone of other tools. The Utility Holster mounts to your crane or tripod using a rubberized lined Velcro mount.

The Utility Holster is a multi-purpose accessory that works great for holding your drink, tools, phone, and can even be used as a fine tuning weight adjustment, by sliding it along the crane rail to fine tune the balance of your crane.

$14.95     Add to Cart

Make your transportation easier with the newly redesigned Kessler Crane® Soft Case! This case is custom made for the Kessler Crane®. The new model has a rigid Masonite padded floor. The foam lined top and sides keep their soft shape and ensure the protection of your equipment. A removable V-shaped “taco” divider creates three separate sections, each piece of your 12 foot crane can be easily placed in it’s own padded slot. No more scratches from rubbing together! If you have opted for the 8 foot crane, use the extra space to house your extra accessories. We have included a utility pouch with a velcro flap on the front. Use this 12” by 18” wide pocket to carry your tools, extra plates, light weights...whatever you need! With less surface area than the old model, the Kessler Crane® soft case makes shooting on location with your Crane a snap!

$129.95    Add to Cart

The Hard Case for Crane or K-Pod (13527) is Hard Case "shell" that holds the Crane or K-Pod Soft Case. The case is sealed, with a purge valve, has jam-free latches, wheels with bearings, side handles and a large front handle, making this the perfect case for air travel.

This case is an empty "shell" to hold the Soft Case (sold seperately). 

Approximate External Dimensions: 57"L x 14"W x 11"H

Click here for photos and specifications .

$349.95       Add to Cart