|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Kwik Release System is a unique, patent pending mounting system featuring solid billet aluminum and stainless steel construction. With a one hand drop-in instant latching and push button drop-gate release, this mounting system is strong, secure, fast and easy to use.
|
The Shuttle Pod Start Rail Kit (4 ft) is the base to your Shuttle Pod Rail System. By adding on the 4 foot Extension Rail Kit (or multiple), you can expand your Shuttle Pod Rail System to 8 ft, 12 ft, or more (with proper supports).
Starter Kit Includes:
4 ft of Shuttle Pod Rail (2 pcs)
Choose between:
1 Set of Shuttle Pod Outrigger Foot Kit (2 pcs)
or
1 Set of Shuttle Pod End Clamps (2 pcs)
|
Use this plate with the Kessler Kwik Release System for cameras or even mount accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This plate is ideal for DSLR’s, due to their small footprint, as the plate will not stick out which makes for easy packing. It was also designed to be used with the Pocket Jib Traveler in conjunction with the Kessler Kwik Release system for quick and easy mounting.
|
The Keeper / Grabber Wheel Kit is used to hold your Shuttle Pod to the rails, when using in an inclined or inverted configuration.
Includes:
2 wheel skirts with 8 wheels and clamp brackets
|
Use this plate with the Kessler Kwik Release System for larger cameras or when greater adjustability is needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turn your 4 foot Shuttle Pod Rail Starter Kit into a 8 foot length, or add multiple extensions to extend the rail length longer. The cross includes standard threaded holes for adding additional support.
Includes:
2 - 4 foot Rails
2 - Coupler Bars
4 - Knobs
1 - Cross Brace
|
Use this plate with the Kessler Kwik Release System for mounting Kessler sliders, the REVOLUTION Head, High Hats or even mount accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes.
|
The Shuttle Pod Outrigger Foot Kit is an adjustable foot support system that can be attached to the Shuttle Pod rail for our Kessler Crane when using as the rail system for your Shuttle Pod.
Includes set of 2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Kessler Low Profile Ball Head is an easy to use, ultra-low profile ball head system with a heavy duty weight capacity. The strong locking ball has 62 degrees of total adjustability. It features a 3/8”-16 thread stud on the top and bottom providing easy mounting to all the Kessler sliders and Shuttle Pods, without the need for an adapter.
|
The Kessler Low Profile Ball Head is an easy to use, ultra-low profile ball head system with a heavy duty weight capacity. The strong locking ball has 62 degrees of total adjustability. It features a 1/4"-20 thread stud on the top and 3/8”-16 on the bottom providing easy mounting to all the Kessler sliders and Shuttle Pods, without the need for an adapter.
|
The Kessler Multi-Angle Mounting Plate is designed to work in conjunction with the Kessler Low Profile Ball Head. The mounting plate can be attached in a 45° or 90° configuration and, coupled with the range of movement of the Low Profile Ball Head, will allow for configuring you camera at just about any angle you desire. The ability to mount to the LP Ball Head in a 90° configuration is ideal for doing vertical slider moves. With the optional Multi-Angle Cheese Plate, you can also attach various accessories and mounts; even another Multi-Angle Mount.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You can use the Kessler M-A Cheese Plate with the Kessler Multi-Angle Mount to attach various accessories, like monitor mounts, mics, lights, etc. You can even mount another Multi-Angle Mount for specialized camera configurations.
|
1/4"-20 Top Plate for Low Profile Ball Head
Includes: - Top Plate with 1/4"-20 stud - 3 bolts for mounting
|
3/8"-16 Top Plate for Low Profile Ball Head
Includes: - Top Plate with 3/8"-16 stud - 3 bolts for mounting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flat Mount Adapter to mount your fluid head flush to the Pocket Dolly™ carriage.
|
Giottos MH621 Quick Release Plate & Receiver to mount camera to the Pocket Dolly™ carriage.
|
Giottos MH7001 Ball Head allows for mounting of Giottos MH621 Quick Release on top. Requires Flat Mount Adapter (to mount to slider carriage).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kessler precision machined 100mm - 75mm bowl adapter. Converts 100mm bowl into a 75mm bowl.
|
Compatible with the 501PL camera plated (supplied with the head 501HDV, 503 and 519 Video Heads) and the special 501PLONG accessory plate. This Quick Release adapter gives you the freedom to remove the camera from the head without detaching it from the plate and put it on any other support. Supplied with 1/4” and 3/8” camera screws.
|
The Kessler 100mm Ball Mount (for Revolution Head and Sliders) is used to mount the REV2 Pan & Tilt Head, Revolution Pan/Tilt Head or our sliders to 100mm or 75mm bowl tripod legs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kessler 100mm High Hat
(includes knob for fluid heads with 3/8" threaded stud)
NOTE: Optional M10 Knob
For fluid heads with metric M10 threaded stem/stud like Sachtler, Cartoni, etc.
|
Optional M10 Knob
(for fluid heads with metric M10 threaded stem / stud)
|
A fully articulated arm with 90° pivotable and 360° rotatable ends, with 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads. Load capacity is 5.4 lbs.
Use the Flat Mount Adapter to attach the Magic Arm to the carriage of our sliders.
MANFROTTO REBATE:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kessler Outrigger Feet are a sturdy adjustable foot system for the Philip Bloom Pocket Dolly, CineSlider™ & Pocket Dolly™ sliders.
Sold as a set of two in a black, Padded case included.
|
Used for measuring cart movement for calibration or repositioning. Tape measure is in inches. For Standard 3' CineSlider™.
When ordering with your CineSlider, we will install the measuring tape on the top of both channel rails for you.
|
Used for measuring cart movement for calibration or repositioning. Tape measure is in inches. For Standard 5' CineSlider™.
When ordering with your CineSlider, we will install the measuring tape on the top of both channel rails for you.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The new Hard Travel Case is an ideal case for your slider and accessories. The case comes with 'pick & pluck' foam insert, and there is enough room for your 3' CineSlider or Pocket Dolly, elektraDRIVE accessories, mounts, & even a Hercules 2.0 head.
|
The Long Travel Case (13513) is an ideal case for your slider and accessories. The case comes with 'pick & pluck' foam insert, and there is enough room for your 3' CineSlider or Pocket Dolly, elektraDRIVE accessories, mounts, & even a Hercules 2.0 head. You can also use this case for your Shuttle Pod or Shuttle Pod Mini system. The case is sealed, with a purge valve, has jam-free latches, wheels with bearings, side handles and a large front handle, making this the perfect case for air travel.
|
Kessler Pocket Dolly™ Soft Case for the Standard Length (3')
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Sportube case, is a great hard case travel solution for your 5' CineSlider and custom soft case. Put your 5' CineSlider in the custom soft case, and slide it inside the Sportube hard shell case.
|
The 100mm Bowl Mount allows for mounting a 100mm Ball fluid head to the Shuttle Pod. You may also mount a 75mm Ball fluid head, using the optional 100mm - 75mm Bowl Adapter ring.
Not compatible with first edition Shuttle Pod that has the camera platform without the center insert "cutout". If you have the original Shuttle Pod that only has the mounting holes in the center of the plate, this will not work, and you will need the 100mm High Hat in the slider accessories area.
Includes:
100mm Bowl Mount w/ Mounting Hardware
Cup Washer
3/8"-16 Threaded Knob
|
Used for measuring cart movement for calibration or repositioning. Tape measure is in inches. Can be cut to fit both Standard and Traveler size Pocket Dolly.
When ordering with your Pocket Dolly, we will install the measuring tape on the rail for you.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use the Shuttle Pod Cross Brace when you need to add additional supports under your Shuttle Pod rail (or Kessler Crane being used as your rail). The cross brace includes standard threaded holes for adding additional support.
Includes:
4 - knobs
1 - cross brace
|
Kessler CineSlider™ Soft Case for 3' CineSlider
|
Kessler CineSlider™ Soft Case for 5' CineSlider
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kessler Pocket Dolly™ Soft Case for the Traveler Length (2')
|
Choose your desired belt length for extending your Shuttle Pod.
|
Kessler All-Terrain Outrigger feature a sturdy
adjustable foot system for the Philip Bloom Pocket Dolly, CineSlider™ &
Pocket Dolly™ sliders. These 360 degree adjustable legs are perfect for
supporting our sliders in just about any situation. With indexable locking
lever knobs you can easily tighten the legs into any position. Use these in
place of the regular Outrigger Feet when more than 2" of adjustment is
needed.
Sold as a set of two in a black, Padded case included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Soft Case for Stealth - Traveler Length
|
Soft Case for Stealth - Standard Length
|
Soft Case for Stealth - Mini Length
|
|
|
|
|
|
|
|
|
|
|
|
The Manfrotto 244 Variable Friction Magic Arm is a fully articulated arm with 90° pivot-able and 360° rotatable ends, and an elbow that rotates 360°. The knob allows partial loosening for safe and precise positioning of a light head or camera. It has 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads. Although it is supplied with a camera platform, it requires a Super Clamp or Base (available separately) for use.
Use the Flat Mount Adapter to attach the Magic Arm to the carriage of our sliders.
|
|
|
