Facebook Twitter YouTube Vimeo
0
You are here : Home > Products > New Releases
Sort By:
Page of 1
CineDrive Turntable Kit
Our Price: $1,979.90
Kessler Parallax
Our Price: $599.95
Kessler K-Plate
Our Price: $149.95
The CineDrive Turntable delivers the same superior performance as the CineDrive Pan and Tilt Head, but specifically designed for pan movements and product shots. Its high-precision worm drive system ensures ultra-smooth motion that is lash free, eliminating the need to calibrate for lash compensation and preventing the possibility of being back-driven, keeping your camera safe even if power is lost to the system. Choose from several accessories like black or white Corian top surfaces (available in 3 sizes) for elegant product shots or even All-Terrain Outrigger Feet for configurations near surface level. Other accessories include degree rulers, heavy duty and weather resistant cable connections and a multitude of mounting holes give CineDrive the tools and flexibility needed for precision performance. The Kessler Parallax™ system provides automatic panning and fixed-point shooting capabilities to the Kessler line of sliders. Previously only capable with motorized panning devices, Kessler Parallax™ accomplishes inward and outward panning shots, providing users a second axis to their linear movements. The Kessler Parallax’s™ non-intrusive design allows users to choose between automatic panning or standard linear sliding without removing the Parallax bar. The K-Plate is a Kwik Release plate and all-around mounting solution designed to help keep your accessories organized. Built with CineDrive® in mind it provides the compact mounting needed to organize tools such as monitors, audio equipment, CineDrive® focus and zoom motors and much more. Its wide footprint with rubber-tipped feet allow for stable table-top mounting and its array of threaded holes provide near infinite customization. Add to the fact that it accepts 15mm rods and can include an optional side-mounted cheese plate and the K-Plate delivers incredible versatility.
This is for the TrekPak insert only - including top and bottom foam pieces - for fitting in a Pelican 1560 hard case.

Get the best protection possible from the inside out with the TrekPak 1560 insert. Protect and organize your gear with TrekPak's innovative sturdy divider and pin system.

This insert has been custom designed by TrekPak to fit a 5-axis CineDrive System, however, since the insert is adjustable/re-arrangeable, it can be arranged for several other applications.
The CineDrive Trigger Cable for RED Epic/Scarlet connects from the camera trigger port on an MCB or pan/tilt head to the sync port on a RED camera. Once the cable is connected and 'Camera Roll' is enabled in the software, the camera can be triggered on and off based on the Pre-Roll and Post-Roll times specified in the Camera Roll section of the Delay menu.

Also works with power up/down and many other user defined functions set within the RED cameras.

Requires latest kOS software/firmware (v3.1 or later)
The CineDrive Trigger Cable for RED One connects from the camera trigger port on an MCB or pan/tilt head to the sync port on a RED camera. Once the cable is connected and 'Camera Roll' is enabled in the software, the camera can be triggered on and off based on the Pre-Roll and Post-Roll times specified in the Camera Roll section of the Delay menu.

Requires latest kOS software/firmware (v3.1 or later)
Parallax Soft Case (3')
Our Price: $99.95
Parallax Soft Case (2')
Our Price: $89.95
Magnalink Rod Adapter
Our Price: $79.95
Securely fit your 3' Kessler slider with Parallax™ mounted, in this custom padded soft case.
Securely fit your 2' (Traveler) Kessler slider with Parallax™ mounted, in this custom padded soft case.
Although able to be used in several applications, the Magnalink Rod Adapter was designed to be able to quickly mount CineDrive® Motor Control Boxes (MCBs) to rods with the help of the Magnalink Mounting Plate (see below accessories). Easily organize your F.I.Z. MCB's and keep them connected to your camera rig thus being able to move your camera and focus motors around without detaching the MCBs.
Magnalink Mounting Plate
Our Price: $69.95
Magnalink Motor Clamp
Our Price: $69.95
K-Plate Kickstand
Our Price: $69.95
When using a system such as CineDrive®, staying compact and organized is a concern many filmmakers have. Kessler’s innovative Magnalink™ mounting system addresses those concerns while also providing more mounting options than ever before. Whether it’s to keep motor control boxes mounted and organized, adding rods to build a rig with the Magnalink™ Rod Adapter or securing slider motors utilizing the new Magnalink™ Slider Motor Mounts, these tools accomplish it all giving users more flexibility when designing their CineDrive® system. Use this Magnalink™ Motor Clamp with the Magnalink™ Mounting Plate to mount CineDrive® Motor Control Boxes (MCB's) to the new style CineDrive® slider motors. Use this to balance your K-Plate if front or back heavy due to larger camera rigs.
Kessler Kwik Slider Plate
Our Price: $49.95
CineDrive Brain Soft Case
Our Price: $49.95
K-Plate Cheese Plate
Our Price: $39.95
Use this plate to attach a slider to a Kwik Release system or even mount accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes. The CineDrive® Brain Soft Case is custom made to hold a CineDrive® Brain and other accessories like cables, terminators, etc. Perfect for mounting extra accessories to your K-Plate, such as monitors, microphones, lights, etc.

Includes:
- Cheese Plate
- 7/32" Allen
- 3/16" Allen
- 1/8" Allen
- 1/4"-20 x 1/2" Socket Head Cap Screw
- 3/8"-16 x 1/2" Button Head Screw
Use this 3 ft. extension cable to extend your current Camera Control Cable.